Vintage Clothing Sizing & Measurement Guide

Same letter on the tag. Different fit on the body. Vintage clothing can vary by brand, era, cut and wear, so compare the listing's measurements with a similar piece that already fits you well.

Measure a garment you own, not your body.
Lay it flat, smooth it gently and keep the tape straight. Do not stretch the fabric. Use the same units and measuring points shown in the listing.

How to measure T-shirts, sweatshirts & jackets

A: measure a top straight across from armpit to armpit. B: measure from the high shoulder beside the collar to the bottom hem.

A. Pit-to-pit width

Lay the top flat. Measure straight across the chest from one armpit seam to the other. This is the flat width, not a measurement around your body.

B. Shoulder-to-hem length

Measure straight down from the highest point of the shoulder beside the collar to the bottom hem. Keep the garment flat and the tape straight.

For a jacket, fasten it before measuring. Compare a jacket with a jacket, rather than a thin tee, to account for the layers you plan to wear.

Check the starting point: shoulder-to-hem and back-collar-to-hem are different measurements. If a listing specifies collar-to-hem, use that same method when comparing. Ask us if a measurement is unclear.

Compare the measurements, not just the tag

  1. Choose a similar garment you like the fit of.
  2. Measure its width and length using the steps above.
  3. Compare both numbers with the product description.
  4. Decide whether you want a closer, similar or roomier fit. Fabric, cut and stretch still matter.
Example: your favorite tee measures 22 inches pit to pit and 28 inches long. A listing measuring 22 × 28 inches is a useful starting point for a similar fit. A 24-inch width gives more room across the chest; a 30-inch length hangs longer.

Flat width vs. circumference

Doubling a pit-to-pit width gives an approximate garment chest circumference. It does not tell you which body measurement will fit comfortably.

Example T-shirt widths, measured flat
Pit to pit Approx. garment chest Flat width in cm
18 in 36 in 45.7 cm
20 in 40 in 50.8 cm
22 in 44 in 55.9 cm
24 in 48 in 61.0 cm
26 in 52 in 66.0 cm

These are measurement examples, not a universal S–XXL size chart. One inch equals 2.54 centimeters.

How to measure pants & jeans

A: measure straight across the fastened waistband, then double it. B: measure the inseam from the crotch seam to the leg hem.

A. Waist

Fasten the pants and lay them flat with the waistband aligned. Measure straight across the waistband and double the number for the approximate waist circumference. A 17-inch flat waist is approximately 34 inches around.

B. Inseam

Measure along the inside leg seam from the crotch to the bottom hem. Compare with pants that sit at a similar point on your waist.

Rise, thigh width and leg opening also affect the fit. If you need those measurements, send us the product link before buying.

Vintage sizing questions

Why can a vintage large fit differently?

Size standards and cuts vary between brands and eras. Wear, washing and alterations can also change a garment's dimensions. The listed measurements are a better comparison than the size label alone.

What does “fits like” mean?

It is a fit suggestion rather than a replacement for the tag size. Compare the actual measurements and photos before deciding.

What if a listing has no measurements?

Contact 3rdStrike with the item link and the measurements you need. Ask before purchasing if fit is uncertain.

Can I return a piece if the fit is wrong?

Read our current return policy before ordering. Contact us if you need help checking the fit first.

Find your next piece

Need a second opinion? Send us the listing or message @3rdStrikeNJ.